Dimensions - aqua A-POOL-CHLORO AW96CL-HC897 Manuel D'installation Et D'entretien

PANNELLO A-CHLORO AW96CL–HC897
Recording output signal 4-20 milliamps.
In addition to the above proportional milliamp signal, a further signal is provided for recording
porpuses. This signal is ranged across the full ppm scale for 4 milliamp at 0.00 ppm. To 20
milliamps at 5.00 ppm. This signal is also isolated by photo coupling.
When F8 function is activated the instrument function according to the flow sensor (pins16-
17-18).
Manteinance HOLD button.
The free clorine meter provided with a HOLD button, for mainteinance purposes, By pushing this
button the ppm display is locked /frozen at the last reading. The display is released at the next
push of the HOLD button. This facility enables the operator to replace an electrode or removeit
for cleaning with minimal disturbance of the dosing system, chart recorder, monitoring PC, or any
other associated equipment.
When F8 function is activated the instrument function according to the flow sensor (pins 16-17-18)
Connection
ADSP7000612
1 2 3 4 5 6 7 8
FUSE
ground
A x B x C x D x E = 212 x 237 x 304 x 125 x 92 (mm
04/08/2011 Rev.1.2
9 10 11 12 13 14 15 16 17 18
PT CU
(sonda)

Dimensions

pag. 29