Introduction; Device Description; Scope Of Delivery; Proper Use - Parkside PDM 600 B2 Consignes D'utilisation Et De Sécurité

2. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope that your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts,
• Improper use
• Failures of the electrical system in the event of the electri-
cal regulations and VDE provisions 0100, DIN 57113 /
VDE0113 not being observed.
Note:
Read the whole text of the operating manual before assembly
and commissioning.
This operating manual should help you familiarise yourself with
your power tool and teach you how to use it for its intended
purpose.
The operating manual include important instructions for the
safe, proper and economic operation of the power tool, for
avoiding danger, for minimising repair costs and downtimes
and for increasing the reliability and extending the service life
of the power tool.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the power tool in your country.
Keep the operating manual package with the power tool at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed by all
operating personnel before starting the work. The power tool
may only be used by personnel who have been trained to use
it and who have been instructed with respect to the associated
hazards.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally rec-
ognised technical rules for operating woodworking machines
must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.

3. Device description

1. Motor unit
2. On/Off switch
3. Speed control
4. Headstock drive centre
5. Tool support
6. Tool support
7. Centring pin
8. Lock nut
9. Tailstock
10. Hand wheel
11. Clamping lever tailstock
12. Machine bed
13. Locking screw
14. Tightening lever for tool support
15. Face plate
A. Elongated holes
B. Fixing screw

4. Scope of delivery

• 1 motor unit
• 1 headstock drive centre
• 1 tool support holder
• 1 tool support
• 1 centring pin
• 1 tailstock
• 1 machine bed
• 1 face plate
• 2 spanners, size 24
• 1 Wood-turning chisel, flat/angular
• 1 Wood-turning chisel, hollow
• 1 tool support holder tightening lever
• 8 fastening screws (B)
• 1 Operating manual

5. Proper use

The wood-turning machine is used for working wood with suit-
able wood-turning chisels.
The machine complies with the applicable EC machinery directive.
The safety, operating and maintenance specifications of the
manufacturer, as well as the dimensions specified in the techni-
cal data, must be observed.
The applicable accident prevention regulations and the other
generally accepted safety rules must be observed.
The machine may only be maintained or repaired by compe-
tent persons who are familiar with it and have been informed
of the dangers. Any liability of the manufacturer for damages
resulting from arbitrary changes to the machine is excluded.
The machine may only be operated with original accessories
and original tools from the manufacturer.
Any use beyond this is improper use. The manufacturer is not re-
sponsible for the resultant damages, the user bears this risk alone.
m Please observe that our equipment was not designed with
the intention of use for commercial or industrial purposes. We
assume no guarantee if the device is used in commercial or
industrial applications, or for equivalent work.
GB 37