Setting The Picture Size - Nyrius NY-LED1980N Guide De L'utilisateur

You can select from among the following items and parameters.
Text Size:
Text Type:
Text Edge:
Text Color:
Text Opacity:
Background Color:
Background Opacity: Auto, Solid, Transparent, Translucent, Flashing
Note:
• You cannot set both "Text Color" and "Background Color" as a same color.
• You cannot set both "Text Opacity" and "Background opacity" to "Transparent".

SETTING THE PICTURE SIZE

You can view 480i and 480p format programs in a variety of picture sizes— Natural, Cinema Wide1,
Cinema Wide2, Cinema Wide 3, Full and Native.
Selecting the picture size
1. Select "Picture", then press
2. Press ▲ or ▼ to select "Picture Size", then press
Picture Size menu. Press ▲/▼ or corresponding Number buttons (0-4) to
select the desired picture size, as described below.
Note:
• Selectable picture sizes may vary depending on the input source or broadcast signal.
• Picture Size menu also can be displayed by pressing PICTURE SIZE on the remote control.
Natural
In some cases, this image will display the size of
standard 4:3 with a black side bar.
Cinema Wide1 (for 4:3 format
programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture
remains near its former ratio. The top and bottom
edges of the picture may be hidden.
Cinema Wide2 (for letter box
programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion). The top and bottom
edges of the picture may be hidden.
Note:
• Some High Definition and/or Digital broadcasts may not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning rate of 720p, 1080i or 1080p (HDMI only) only
the Cinema Wide2 and Full picture size feature is available.
• In PC Mode, only the Natural, Full and Native picture size features are available. In PC Mode
(WXGA), only the Full and Native picture size features are available.
All manuals and user guides at all-guides.com
Auto, Small, Standard, Large
Auto, Style1, Style2, Style3, Style4, Style5, Style6, Style7
Auto, None, Raised, Depressed, Uniform, Left Shadow, Right Shadow
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan
Auto, Solid, Transparent, Translucent, Flashing
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan
or ENTER.
Cinema Wide3 (for letter box programs
with subtitles)
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at
the top and the bottom. The top and bottom edges
of the picture may be hidden.
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Native (for PC mode only)
Detects the resolution of the signal of the image
and it will be shown on the screen with same
amount of pixels.
- 21 -
or ENTER to display