Checking The Digital Signal Strength; Labeling Channels; Labeling Video Inputs - Nyrius NY-LED1980N Guide De L'utilisateur

Clear All
All channels are deleted from the channel memory.
1. Select "Channel", then press
2. Press ▲ or ▼ to select "Add/Delete", then press
3. Press ▲ or ▼ to select "Clear All", then press
CHECKING DIGITAL SIGNAL STRENGTH
This TV will allow you to view the digital signal meter for digital channels.
1. Select "Channel", then press
2. Press ▲ or ▼ to select "DTV Signal".
3. Press ENTER to check the Digital signal strength. The Digital signal strength
screen will appear. If necessary, adjust the direction of the antenna to obtain
the maximum signal strength.
Note:
• Signal meter feature is not available for analog channels.
• After 240 seconds, DTV Signal screen will return to normal TV-operation
automatically.
Channel label appear with the channel number display each time you turn on the TV, select a channel,
or press DISPLAY.
You can choose any four characters to identify a channel.
To create channel labels
1. Select "Channel", then press
2. Press ▲ or ▼ to select "Ch Label", then press
3. Press or to select a channel you want to label, then press ▼.
4. Press or repeatedly until the character you want appears in the first
space.
The characters rotation as follows:
If the character which you desire appears, press ENTER. Repeat this step
to enter the rest of the characters. If you would like a blank space in the
label name, you must choose the empty space from the list of characters.
5. When you finish inputting the label name, press EXIT to return to the normal
screen.
6. Repeat steps 3-4 for other channels. You can assign a label to each channel.
To clear a Ch Label
1. After step 3 above, press ▲ or ▼ to select "Label Clear", then press
Note: The channel labels will be reset after "Automatic Search" on page 17.
The Video Label feature allows you to label each input source for your TV.
1. Select "Setup", then press
ENTER
2. Press ▲ or ▼ to select "Video
Label", then press
3. Press ▲ or ▼ to select an input
which you want to label.
4. Press or to select the desired
label for that input source.
All manuals and user guides at all-guides.com
or ENTER.
or ENTER

LABELING CHANNELS

or ENTER

LABELING VIDEO INPUTS

– :
or
VCR : Video cassette recorder
DVD : DVD video
or ENTER.
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD :
- 19 -
or ENTER.
or ENTER.
or ENTER.
or ENTER.
Uses the default label
name
HDMI device (only for
HDMI inputs)