Start Mode "Punch; Max Brake Force; Max Reverse Force; Initial Brake Force (Minimum Brake) - Team Orion VORTEX R8.1 pro Mode D'emploi

4. Start mode "punch"

This parameter sets the initial throttle punch when the car
accelerates. Level 1 gives a very soft initial acceleration and
level 9 gives a very strong initial acceleration. Warning!
Stronger acceleration will also result in higher ESC and
motor running temperature. Check the motor and ESC
temperature and adjust the parameter to keep temperature
within safe limits.
› Setting value from 1 to 9

5. Max Brake Force

This parameter sets the maximum braking force. A higher
value provides stronger braking, but it also causes extra
stress to the ESC and motor.
Warning! Stronger brakes will also result in higher ESC
and motor running temperature. Check the motor and ESC
temperature and adjust the parameter to keep temperature
within safe limits.
› Setting value from 12.5% to 100%

6. Max Reverse Force

This parameter sets the maximum power when travelling in
reverse.
› Setting value from 12.5% to 25%

7. Initial Brake Force (minimum brake)

This parameter sets the minimum amount of braking power
when the brakes engage. A higher value will give stronger
brakes but can also cause loss of control and extra stress on
the motor/ESC.
› Setting value from drag brake value to 25%
www.teamorion.com 15