Layout Of Controls - Buffalo GL190 Mode D'emploi

UK

Layout of Controls

4
Gear lever
START button - Press to start the mixer.
STOP button - Press to stop the mixer. Twist clockwise to release and reset (GJ461 only).
GEAR LEVER - Use to adjust the speed of the mixer.
Operation
• Note: Ensure that these instructions have been read thoroughly and the
operation of the appliance is fully understood before use.
• All personnel must be fully trained on the operation and safety precautions
of the Planetary Mixer.
Mixing
WARNING: Always ensure the appliance is turned off before placing hands in
the mixing bowl.
1. Open the safety guard.
2. Fill the bowl.
3. Select the desired speed and close the guard.
• Note: BUFFALO recommend that you start with the slowest speed and
increase the speed gradually as necessary.
• Ensure the safety guard is fully closed or the mixer will not work.
4. Press the START button to begin mixing.
Note: If the appliance is straining to mix then turn the appliance Off and remove
some of the contents of the bowl before restarting.
14
GL190-GL191_GJ461_ML_A5_v7_20180928.indb 14
START button
STOP button
2018/9/28 16:02