Buffalo GL190 Mode D'emploi page 12

UK
Remove all packaging from the appliance.
Remove the wooden pallet from the machine
How to install the rubber feet
(Loosen the four bolts at the bottom of the
wooden pallet).
1. Remove all packaging from the appliance.
Take out the rubber feet from the bowl
2. Remove the wooden pallet from the machine (Loosen
the four bolts at the bottom of the wooden pallet).
Add the rubber feet to the feet of the machine.
3. Take out the rubber feet from the bowl
4. Add the rubber feet to the feet of the machine.
Note: A minimum of two people should
be used to install the rubber feet.
Note: A minimum of two people should
Note: Once the rubber feet have been
installed, ensure the machine is stable.
be used to install the rubber feet.
Note: Once the rubber feet have been installed, ensure the machine is stable.
The type of rubber feet
12
GL190-GL191_GJ461_ML_A5_v7_20180928.indb 12
2
Rubber feet
Rubber feet
2018/9/28 16:02