MODEL: P
50
LSLW
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
PREPARE THE TOOL
LOADING CLEAT NAILS
LOADING STAPLES
CHANGE THE FOOT PLATE
SETTING THE AIR PRESSURE
OPERATING THE TOOL
CLEARING JAMS
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLESHOOTING
WEARING PARTS
WARRANTIES
WARNING:
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
SAVE THIS MANUAL
●
Keep this manual for the safety warnings,
precautions, operations, inspections and
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
02
.
HTTP://WWW FREEMANTOOLS COM
P3
P5
P5
P6
P6
P6
P7
P7
P8
P8
P9
P
10
P
11
P11
P12
WARNING:
!
To avoid serious personal injury, do not
attempt to use this product until you read
the manual
thoroughly and understand it
completely. Save this manual and review
frequently for continuing safe operation
and instructing others who may use this
tool.
.
1-888-669-5672
MODEL: P
50
LSLW
●
In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS
SIGNAL
MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
!
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
!
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
GENERAL SAFETY RULES
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS.
WARNING:
!
When using tools, basic precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
WARNING:
!
This product or its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
WORK AREA
Keep the work area clean and well lighted.
●
Cluttered benches and dark areas increase the
risks of accidents.
●
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
The tool
creates a spark which may ignite flammable
liquids, gases or dust.
●
Keep bystanders, children, and others away
while operating the tool.
Distractions could
result in improper use and cause injury.
Avoid unintentional misfires.
Always use
●
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
.
HTTP://WWW FREEMANTOOLS COM
PERSONAL SAFETY
Always wear eye protection.
Operator and
●
others in the work area should always wear
ANSI-approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury.
●
Always wear hearing protection when using
the tool.
Prolonged exposure to high intensity
noise may cause hearing loss.
●
Use safety equipment. A dust mask, non-skid
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
if you are producing metal filings or wood chips.
Dress properly.
Do not wear loose clothing or
●
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
●
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Keep proper footing and balance at all times.
●
Proper footing and balance enables better
control of the tool in unexpected situations.
Make sure the hose is free of obstructions or
●
snags.
Entangled or snarled hoses can cause
loss of balance or footing and may become
damaged, resulting in possible injury.
.
1-888-669-5672
03