ECOVACS ROBOTICS DEEBOT OZMO 960 Manuel D'instructions page 15

4
Install Side Brushes
6
Charge DEEBOT
Note: When DEEBOT completes the cleaning cycle or when the battery gets low, DEEBOT automatically returns to the Docking Station to recharge
itself. DEEBOT can also be sent back to the Docking Station at any time by using the ECOVACS App or by pressing the AUTO Button on the robot
for 3 seconds.
Empty remaining water from the Reservoir and remove the Reservoir and the Cleaning Cloth Plate before charging DEEBOT.
3. Operating and Programming
5
Power ON
Note: I = ON, O = OFF.
15
EN