Bluetooth ® Pairing; Precision Cooking - Cafe CHP9530 Manuel Du Propriétaire

Bluetooth
Pairing a Bluetooth
Hold the Precision Cooking pad for 3 seconds until
display reads "Add" and
pairing mode on the unit, then activate your device to
initiate the device's pairing mode. Refer to the table
below for device specific instructions.
Supported Devices
Hestan Cue fry pan
Hestan Cue pot
Precision Probe
Removing Bluetooth
Hold the Precision Cooking pad for 3 seconds until
display reads "Add" and
display shows "dEL", then tap
devices. The icon will turn off when complete.
NOTE: Your unit cannot delete a single, or specific
device. After all devices are cleared, devices you wish to
use must be paired again.

Precision Cooking

The Precision Cooking feature allows precise temperature control of certain cooking devices for improved results.
Initiating a Precision Cooking Mode
1. Touch the Precision Cooking pad.
2. Any burner available for Precision Cooking will flash.
This excludes any burner on in standard mode. If no
Precision Cooking devices are paired, no burners
will flash as available. NOTE: Only one burner may
run a Precision Cooking mode at a time. If another
precision mode is attempted, the burner in use for
Precision Cooking will flash.
3. The display will read "SEL", instructing you to select a
burner to use.
10
Pairing
®
Device
®
is blinking. Tap
How to Initiate Pairing
Tap pan handle
Tap pot handle
Press side button once
Devices
®
is blinking. Tap
to delete all paired
When stops blinking,
to initiate device has been added.
Repeat this step for each
additional device. Up to 5
devices will be stored in
memory. To exit Pairing,
touch Precision Cooking
pad one time, or menu will
automatically exit after 60
seconds of no user input.
so that
4. Touch the On/Off pad for the desired burner, or press
Sync Burners to use Precision Cooking across the
two left burners.
49-80835-1