Configuration (Standalone); Act Automatic Operation - Chauvet DJ COLORstrip Mini FX Mode D'emploi

Configuration
(Standalone)
ACt Automatic
Operation
COLORstrip™ Mini FX User Manual
Set the product in one of the standalone modes to control without a DMX
controller.
· Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode
(Static, Automatic, or Sound-Active) to a DMX string connected to a
DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To enable ACt Automatic Operation, do the following:
1. Press MODE repeatedly until ACt shows on the display.
2. Press ENTER.
3. Use UP or DOWN to select the desired auto program A000—A036.
4. Press ENTER.
Certain programs will have additional functionality. To find these options,
press ENTER after selecting an auto program. Then use UP or DOWN to
choose the desired setting. Not every program will feature additional
functions.
Function
F000—F100
P000—P100
L000—L006
C000—C100
S000—S100
r001—r016
Description
Flash speed (slow to fast)
Run speed (slow to fast)
Laser
Blue (only available in A034)
Laser strobe speed
Laser gobo
Page 17 of 60