MasterCraft 068-0003-4 Guide D'utilisation page 8

7
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0003-4 | contact us 1-800-689-9928
10. Install Mounting Strap (Part 60)
(Fig. I).
A. Remove one M4 x 8 screw (Part
19) from the back corner protector.
This screw will no longer be
needed.
B. Attach the mounting strap (Part
60) to the back corner protector as
shown in Fig. I using M4 x 12
screw (Part 61) and M4 washer
(Part 27).
C. Drill a hole in the wall with a
5/16" drill bill and insert the wall
anchor (Part 55-A) into the hole.
D. Attach the other end of the
mounting strap (Part 60) to the wall
using M6 x 50 screw (Part 55) and
M8 washer (Part 27-B).
Repeat steps A through D to install
the other mounting strap.
11. The storage cabinet is ready to
be used. Use the keys (Part 22) to
lock the left door (Part 6) and right
door (Part 7), if desired (Fig. J).
headline bars headline bars headline bars headline bars
Fig. I
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes notes notes
warnings warnings warnings warnings
Fig. J
22
55
60
27
61
6
27-B
55-A
7