MasterCraft 068-0003-4 Guide D'utilisation page 6

5
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0003-4 | contact us 1-800-689-9928
3. Attach the bottom back panel (Part
10), middle back panels (Part 9) and
upper back panel (Part 8) to the
assembled cabinet frame. Starting
from the bottom back panel, insert 30
M4 x 8 screws (Part 19) into the screw
holes of all the back panels and tighten
them using the screwdriver (Part 21)
(Fig. C).
Note:
Two screw holes for corner protectors
are reserved across the top panel and the bottom
panel.
4. Install the levelling feet (Part 24) on
the bottom panel (Part 4) using the
wrench (Part 25) (Fig. D).
5. Turn the cabinet frame to the upright
position.
6. Choose the desired height for
placing each middle shelf (Part 5)
inside the cabinet. Then pull down the
hooks (Part 13) into the hook slots
provided, making sure the four hooks
are placed at the same height. Place
the shelves into the cabinet frame and
press them down onto the hooks (Fig. E).
7. Attach one of two magnets (Part 23)
to the top panel (Part 3) and another
magnet to the bottom panel (Part 4).
Insert two M4 x 8 screws (Part 19) into
each magnet and tighten them using
the screwdriver (Part 21) (Fig. F).
headline bars headline bars headline bars headline bars
Fig. C
8
continuation tabs continuation tabs continuation tabs continuation tabs
Fig. D
notes notes notes notes
Fig. E
warnings warnings warnings warnings
Fig. F
23
19
19
9
25
24
5
3
10
4
13
4