Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Signal booster and available accessories
WilsonPro
Power Supply
A1000 - 3G/4G
™
(2D9116)
Pole Mount Bracket
Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
1. Pole mount - 10 mm open-end wrench or adjustable wrench
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver
Before Getting Started
Before you install your A1000-3G/4G and
start enjoying improved cellular reception
in your facility, please do the following:
1.
Read through all the installation
steps. This will help you know what to
2.
Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces we
reference in the instructions.
3.
Identify the location of your best
available cellular signal. See
instructions that follow.
4.
Determine the best installation
locations for your Outside Antenna,
Signal Boost, and Inside Antenna.
Connect all cables and test the
function of your A1000-3G/4G system
Panel Antenna
(311135)
Appearance of device and accessories may vary.
Wall Mount Bracket
Need help?
support-gh@techlineglobal.com
Wide Band Directional
Antenna
(314411)
Lightning Surge
2' Wilson 400 Cable
(952302)
Find the Strongest Cellular Signal
Before you install your A1000-3G/4G signal
booster, you must determine the location of
the best available cellular signal. This will
and will help you get the best performance
the strongest signal outside your building,
typically at the highest point available, using
any of the following methods:
1.
Best method:
After connecting the power supply
to your surge protected power strip,
connect the Outside Antenna to the
A1000-3G/4G signal booster, and the
A1000-3G/4G to the Inside Antenna.
Have one person outside (on the roof
for best results) rotate the Outside
Antenna with a second person inside
the building near the Inside Antenna
watching the signal strength on a
phone. This allows you to read the
signal strength from nearby cell towers.
a. The person inside should have
the phone in test mode so the
numerical signal strength can be
read. This is more accurate than
the bar indicator.
60' Wilson 400
Cable (952360)
75' Wilson 400
Cable
(952375)
Protector
(859992)
3
Publicité
Chapitres
Table des Matières
