Breville BGR820XL Livret D'instructions page 8

OpERATING YOUR BREVILLE SMART GRILL
c) With your left hand, grip the handle.
With your right hand, pull the
Adjustable Height Control clip towards
you, into the 'BBQ Mode' position.
Continue to pull the clip forward and
simultaneously lift the handle to open,
then gently lower the top plate into the
horizontal 'BBQ Mode' position.
10. Place food on either or both of the
cooking plates. Refer to Grilling Tips
(page 20), Grilling Guide (page 23) and
Recipes (page 28).
NOTE:
Do not use spray-on, non-stick
coatings as these will affect the
performance of the non-stick
cooking plates.
NOTE:
The LCD screen may display
'HEATING' during the cooking
process. This is normal, indicating
that the correct temperature is
being maintained.
14
11. The Smart Grill features an optional
count-down timer which monitors the
time elapsed during cooking. To activate
the count-down timer:
a) Ensure the grill has completely
preheated, the LCD screen no longer
displays 'HEATING' and food has
been placed on the cooking plates.
b) Turn the Timer Dial to adjust the
time in one minute increments up
to 30 minutes. Rotate the dial
clockwise to increase the time, or
counter-clockwise to reduce the
time. The LCD screen will display
the selected time.
c) Press the button within the Timer
Dial once, to activate the setting. The
LCD screen will display a count-down
indicator and the time will begin to
count down.
NOTE:
The count-down timer can be
stopped or paused at any time
by pressing the button within the
Timer Dial a second time. The LCD
screen will no longer display the
count-down indicator. However, the
grill will not turn off, it will remain
heating.
To reset or clear the timer either:
- Rotate the Timer Dial clockwise
to increase the time, or counter-
clockwise to reduce the time. Or,
-press the button within the Timer
Dial and hold for 3 seconds until
the time on the LCD screen
displays '0' zero. Rotate the
Timer Dial clockwise to increase
the time, or counter-clockwise to
reduce the time.
OpERATING YOUR BREVILLE SMART GRILL
12. Once the selected time has elapsed,
the grill alert will sound. The LCD screen
will display a blinking '00' then the
default '0' zero time. However, the grill
will not turn off. It will remain heating,
maintaining the selected temperature,
ready for the next cooking cycle.
NOTE:
The cooking and heating cycle can
be stopped at any time by turning
the Temperature Dial to the 'OFF'
position. The LCD screen will
display 'OFF', the default '0' zero
time and cease to illuminate after
3 minutes. Allow the grill to cool
completely and disconnect from the
wall outlet.
NOTE:
The Breville Smart Grill features a
1-Hour Auto Shut-Off feature. This
ensures the grill is not accidentally
left on for an extended period of
time. If the Temperature or Timer
Dials are not adjusted within 1
hour, the Auto Shut-Off feature
will automatically stop heating the
cooking plates. The LCD screen
will display 'OFF', the default '0'
zero time and cease to illuminate
after 3 minutes. To re-activate the
grill, adjust the Temperature or
Timer Dials.
13. When the food is cooked, remove from
the cooking plates using heat proof
plastic or wooden utensils.
NOTE:
Never use metal or sharp utensils
as these can cause damage to the
non-stick coating of the cooking
plates.
FULLY UNWIND THE pOWER
!
CORD FROM THE CORD
STORAGE BEFORE USE.
15