Child Lock - KENMORE ELITE 465.1332 Serie Guide D'utilisation Et D'entretien

C
YCLES
Sensor Dry
(select models)
Sensor technology allows the dishwasher to
provide optimum drying performance based on the
water temperature reached during the wash cycle and
use of rinse aid. Rinse Aid helps reduce drying time.
Drying performance will improve after several washes
using rinse aid.
At the end of the selected cycle, intermittent drying
will turn the fan on every hour for five minutes for up
to 10 hours or until the drawer is opened for more
than 30 seconds.
Hot air and water vapor will be expelled from the base of
each drawer during the dry cycle (vapor may be visible).
This air/vapor mixture is hot and may cause minor burns.

Child Lock

Quick Quick
Wash Rinse
The control touchpads can
be locked to prevent small
children from starting and stopping the dishwasher or
from changing the cycle and option selections. If this
feature is activated between cycles, the dishwasher
cannot be operated until the controls are unlocked.
The controls can not be locked after a cycle or delay
has started.
Setting the Child Lock:
1. Press the Sensor Dry or Lock pad and hold for
three seconds.
2. An indicator light next to the lock graphic will
illuminate when the controls are locked.
To cancel:
1. Press the Sensor Dry or Lock pad and hold for
three seconds.
2. The indicator light will go off.
Notes:
• If a cycle or option pad is pressed after the
controls have been locked, the indicator light next
to the lock graphic will flash three times and the
dishwasher will beep four times.
• This option does not lock the drawer, only the
dishwasher controls.
All manuals and user guides at all-guides.com
, O
PTIONS AND
Hold 3 Sec. For Lock
CAUTION
Sensor
Dry
Hold 3 Sec. For Lock
Options
High
Sensor Sani-
Sani-Rinse
Temp
Dry Rinse
Wash
Sani-Rinse increases the water temperature in the
final rinse, raising the temperature to meet sanitization
requirements. The Sanitized indicator light to the far right
of the control panel will not light if all requirements for
sanitization have not been met. Sani-Rinse can be
selected with Normal Wash and Smart Sense
Important: Sani-Rinse is mandated when using an
Anti-Bacterial cycle and cannot be cancelled.
To select, press the Sani-Rinse pad after making your
cycle selection. To cancel this option, press the
Cancel/Drain pad.
High Temp Wash
This option adjusts cycles to provide additional
Options
wash time and temperature to aid in the removal of
heavy and/or baked on soils. Selecting this option will
High
Sani- Delay
extend wash time by increasing water temperature
Temp
Rinse Hours
Wash
and/or the number of fills in the wash cycle.
To select, press the High Temp Wash pad after
making your cycle selection. To cancel this option,
press the pad again, or press the Cancel/Drain pad
to cancel all selected cycles and options.
12
L
IGHTS
2 4 8
Delay Start
(select models)
Hours
Resume
Hold 3 Sec. For Lock
Sensor
Dry
Hold 3 Sec. For Lock
2 4 8
Start
Cancel
Resume
Drain
Options
Sanitize
Cancel
Drain High
Sensor Sani-
Rinse-Aid Low
Temp
Dry Rinse
Wash
cycles.
™
Options
High
Sani- Delay
Temp
Rinse Hours
Wash
Sanitized Clean
Rinse-Aid Low