Ranges & Accuracies:
AC Converter: All models are true rms sensing.
Accuracy: Accuracy is specified as +/-(a percentage of the reading + a fixed count) at 23°C±5°C (73.4°F ± 9°F),
less than 75% relative humidity.
Temperature Coefficient: 0.1 times the applicable accuracy specification per degree C from 0°C to 18°C and
28°C to 50°C (32°F to 64°F and 82°F to 122°F)
Range and
Function
Resolution
0.0 to 660.0A
(61-763/61-765)
AC Current
1
0.0 to 999.9A
(61-773/61-775)
0.0 to 660.0A
(61-765)
DC Current
0.0 to 999.9A
(61-775)
0.0 to 600.0V
600.0 to
AC Voltage
1,2
750.0V
0.0 to 750.0V
0.0-600.0V
DC Voltage
2
600.0 to
999.9V
0.0 to 999.9Ω
Resistance
3
1000 to 9999Ω
Capacitance
0.0 to 999.9µF
Audible at < 30
Continuity
0.0 to 999.9Ω
Response time
20.0 to 400.0
Frequency
4
Hz
*Accuracy stated for crest factor ≤ 1.5 at full scale and ≤ 3 at half scale.
Peak Hold response time < 1ms; Accuracy is ±(5% rdg + 15 digits) @ 45-60Hz; >10V for VAC and >10A for A AC/DC
1
2
Input impedance: 1MΩ.
Open circuit voltage ≈ 1.2V DC
3
Frequency Sensitivity: ≥ 5V rms on AC Volts using test leads
4
≥ 5AAC (20 to 100Hz) and ≥ 10AAC (100 to 400Hz) on AC Amps using clamp head.
Accuracy
Input
Protection
61-763/61-773
61-765/61-775
2.0% + 5
2.0% + 5
660A AC
(45Hz to 60Hz)
(20Hz to 100Hz)
(61-763/61-765)
1000A AC
6.0% + 5
6.0% + 5
(61-773/61-775)
(60Hz to 400Hz)
(100Hz to 400Hz)
660A DC
(61-765 only)
N/A
2.0% + 5
1000A DC
(61-775 only)
1.0% + 5
1.0% + 5
(45Hz to 100Hz)
(20Hz to 100Hz)
1.5% + 5
1.5% + 5
1000VDC /
750VAC RMS
(45Hz to 100Hz)
(45Hz to 100Hz)
6.0% + 5
6.0% + 5
(100Hz to 400Hz)
(100Hz to 400Hz)
1.0% +5
1.0% +5
1000VDC /
750VAC RMS
1.5% + 5
1.5% + 5
600V DC/AC
1.5% + 5
1.5% + 5
RMS
600V DC/AC
5.0% +15
5.0% +15
RMS
Audible at < 30
600V DC/AC
Response time
RMS
500mS
500mS
1000VDC /
0.5% + 5
0.5% + 5
750VAC RMS
11
Dispose of waste electrical and electronic equipment
In order to preserve, protect and improve the quality of environment, protect human health and
utilize natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations. The crossed-out wheeled bin indicates
the product needs to be disposed separately and not as municipal waste.
Disposal of used batteries/accumulators!
The user is legally obliged to return used batteries and accumulators. Disposing used batteries
in the household waste is prohibited! Batteries/accumulators containing hazardous substances
are marked with the crossed-out wheeled bin. The symbol indicates that the product is forbid-
den to be disposed via the domestic refuse. The chemical symbols for the respective hazardous
substances are Cd = Cadmium, Hg = Mercury, Pb = Lead.
You can return used batteries/accumulators free of charge to any collecting point of your local
authority, our stores, or where batteries/accumulators are sold. Consequently you comply with
your legal obligations and contribute to environmental protection.
Warranty Statement:
This tester is warranted to the original purchaser against defects in material and workmanship for two
years from the date of purchase. During this warranty period, IDEAL INDUSTRIES, INC. will, at its option,
replace or repair the defective unit, subject to verification of the defect or malfunction. This warranty
does not apply to defects resulting from abuse, neglect, accident, unauthorized repair, alteration, or
unreasonable use of the instrument.
Any implied warranties arising out of the sale of an IDEAL product, including but not limited to implied
warranties of merchantability and fitness for a particular purpose, are limited to the above. The
manufacturer shall not be liable for loss of use of the instrument or other incidental or consequential
damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic
loss.
State laws vary, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
Warranty does not cover batteries.
12