Glatz Suncomfort Varioflex Solar LED Notice D'instructions page 39

39
A
3.2
4.1
, the
ed.
B
360°
C
3.1
4.2
2
Positioning of the sunshade
A Tilt sunshade to mast
1. Release the rotary knob, adjust until
the desired inclination is reached
B Tilting the sunshade left / right
1. Tilt the sunshade by cranking
C Rotate sunshade
1. Step on the pedal
2. Turn the sunshade to the
requested position
3
Closing the sunshade
1. Release the rotary knob until the
sunshade is completely closed
2. Squeeze the Tilt handle, pull down the
carriage
4
Bind/protect the sunshade
1. Pull out / wrap fabric segments
2. Secure the sunshade with the ribbons
4.3
3. Lift the protective cover above the
sunshade section
4. Close the protective cover
!
To extend the service life of the cover-
ing material, GLATZ strongly recom-
mends the use of a protective sleeve
when the sunshade is closed.