Glatz Suncomfort Varioflex Solar LED Notice D'instructions page 37

37
g
6.1
A
4x
6.3
6.2
B
4
Prepare the floor fastening
Place the floor fastening in accordance
with the separate instructions.
or...
Prepare the floor fastening
Floor fastening weights and wind
resistance
Size
[cm]
40 x 40 x 4
5
Pre-assemble standpipe
2. Place swivel base on base
3. Adjust holes / position
4. Place 4 washers in position
5. Pre-assemble swivel base with
4 round-headed screws (M8 × 20mm)
6
Pre-assemble sunshade
1. Place sunshade on swivel base
2. Attach sunshade tightly to swivel
base, using 2 washers and 2 round
headed screws
3. Insert crank into carriage
!
The sunshade is very heavy. Work
in a threesome and hold the sun-
shade securely.
Charge battery
A Charge the battery with the solar panel
B Charge via USB-charging cable
!
The charging time depends on the position
of the sun and its intensity. Do not extract the
electricity through the USB connection.
minimum weight
[kg]
120