Abicor Binzel ABIROB A 300 Mode D'emploi page 22

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment
(PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
5.1 Torch neck
5.2 Connection module
5.3 Bracket
5.4 Cable assembly
6 Putting into operation
Setting up the ABIROB
6.1
torch neck
6.2 Setting up the cable assembly
EN-3
EN-3
EN-3
EN-3
EN-3
EN-4
EN-4
EN-4
EN-5
EN-5
EN-7
EN-8
EN-8
EN-9
EN-9
EN-9
EN-10
EN-11
EN-11
EN-11
EN-11
EN-12
®
A
EN-13
EN-14
6.3 Attaching the machine-side
connector
6.4 Connecting the control lead
6.5 Setting the shielding gas volume EN-16
6.6 Introducing the wire
7 Operation
7.1 Welding process
8 Putting out of operation
9 Maintenance and cleaning EN-18
9.1 Cleaning the wire guide
9.2 Shortening the spiral liner
9.3 Cleaning the torch neck
10 Troubleshooting
11 Disassembly
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
®
ABIROB A
EN-15
EN-15
EN-16
EN-17
EN-17
EN-18
EN-19
EN-19
EN-20
EN-20
EN-22
EN-23
EN-23
EN-23
EN-23