Samson SM10 Mode D'emploi page 11

Input and Output Connections
22. MAIN OUTPUTS 1/4" Jacks - In live
performance applications, these outputs
can be used to connect the SM10 to a
power amp and speakers. In recording
applications, these outputs are used
to connect to a stereo device such as
computer sound card, MP3, or hard disk
recorder. The signals at the Main Outputs
jacks follow the Main Output level controls.
23. MAIN OUTPUTS XLR Jacks - In live performance applications, these male XLR
outputs can be used to connect the SM10 to a power amp and speakers.
In recording applications, these outputs can be used to connect to a stereo
device such as computer sound card, MP3, or hard disk recorder. The signal
at the Main Outputs jacks follow the Main Output level control.
24. Power Switch – Use this switch to turn the
SM10 on and off. To avoid potential damage to
your speakers, turn the SM10 on before you turn
on any connected power amps—and turn it off
after the power amps are turned off. The switch
should be in the off position when connecting
the SM10 to the mains.
25. AC Inlet – Connect the supplied IEC cable here.
SM10
3 4
25 24
1 2 5
23
3 4
25 24
22 20
21
11