Caloric CVU306C-SS Instructions D'installation page 15

REPLACING THE LED LIGHT BULBS
CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one
already used. Make sure all the control switches are off and the hood is unplugged, or the breaker is OFF.
Replacing the LED light fixture:
• This range hood uses LED light fixture: 3W Max 12VLED
• Make sure the range hood is unplugged or turn OFF breaker and make sure the lights are cool to touch.
• Place a flat-head screwdriver between light housing and hood body, gently pry up the light
housing and search for the metal clip.
• Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard
the old light fixture.
• Reverse the steps to install a new LED light fixture. Turn ON breaker and range hood to test for operation.