Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
and the settings will remain.
!
After resetting, the handset will return to standby mode.
23.
Registering a handset to a base
(REGISTER)
The supplied handset is already registered with the number 1. You can
register up to 5 handsets/door units to the same base (see chapter 28
"Optional accessories"). A handset can be registered to up to 4 bases.
!
Press and hold the key [59] on the bottom of the base for at least 5
seconds.
!
Press the
key.
MENU/R
!
Press
or
key repeatedly to select REGISTER.
!
Press the
key.
MENU/R
!
Use
or
key to choose from BASE 1 to 4, i.e. assign one of 4
possible memory positions to the base.
!
Press the
key.
MENU/R
!
When the base is found, and the handset is successfully registered, you
will be prompted to enter the PIN code (the default one is 0000).
!
Press the
key. On validation of the PIN code, the registration tone
MENU/R
will sound and the base assigns a number to the handset. If the PIN code
entered is invalid, a warning tone will sound, and the handset will return
to the previous registration state. If the base is not found, the handset
will behave according to the Out of Range condition.
Notes:
!
If the registration of a handset was deleted, it can be registered to the
base again as described above.
!
To register a registered handset to another base, simply follow the steps
described above with another base.
!
The handset will only work with the base it has last been registered to, or
with the selected base (see chapter 22.9 "Selecting a base").
24. Calling with more than one handset
If you have more than one handset registered to the same base, you can
make internal calls, transfer external calls between the registered
handsets, and set up a conference call.
24.1 Internal call
!
Press the
key. The LCD shows the following message:
12345
!
Enter the number of the handset you want to call (e.g. "3" for handset 3).
the handset entered is valid, the called handset will ring and display HSX
CALLING.
GB - 52
!
The handset user can press the
!
To end your conversation, press the
Notes:
If an external call comes in during an internal call or a conversation with the
door unit, the LCD will show the caller's number and two short beeps will be
heard.
!
Press the
key to end the internal call. Shortly after that your
telephones will ring with the incoming call.
!
Now answer the external call with the
It is not possible to call a door unit from a handset.
24.2 Call transfer between handsets
You can transfer an external call between handsets that are registered to the
same base.
!
During an external call, press the
!
Enter the number of the handset you want to transfer the call to.
!
If the called party wants to answer your call, he/she can press the
key to talk with you. At this time you can inform him/her of the
incoming call.
!
When the called party wants to answer the external call, press the
key or replace the handset to the base to complete the transfer.
24.3 Setting up a conference call
When you have both an external call and an internal call in progress, you can
set up a 3-way conference call like this:
1. During an external call, press the
the handset you want to join the 3-way call.
2. The called party presses the
3. The calling party presses the
4. Either of the two handsets can press the
call at any time.
Note:
If one of the handsets leaves the conference call, the remaining handsets will
continue the conference.
25. Caller ID on call waiting
When you subscribe to Call Waiting service from your local telephone
company, the handset will display the name and number of the second caller
while you are having a conversation.
!
Press the
key to answer the second caller.
MENU/R
!
If you press the
MENU/R
the first caller.
If
key to answer the internal call.
key.
key.
key.
key and then enter the number of
key to answer.
key to start the 3-way call.
key to leave the conference
key, you can continue with your conversation with
Publicité
Chapitres
Table des Matières
