Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
Press the
key. The LCD shows "PIN?".
MENU/R
!
Enter the current PIN code, then press the
22. Handset settings (HS SETTING)
22.1 ALARM
You are able to set the alarm on the handset.
!
Press the
key.
MENU/R
!
Press
or
key to select HS SETTING.
!
Press the
key. The LCD shows "ALARM".
MENU/R
!
Press the
key. The LCD shows the current setting.
MENU/R
!
Use
or
key to select ON or OFF.
!
Press the
key.
MENU/R
!
If you select ON, the LCD shows the current alarm time.
#
Enter the new time with numeric keys 0 to 9 in 24h format HH:MM.
#
Press the
key. A beep sounds.
MENU/R
#
Press
or
key to enable or disable the snooze function
#
press the
key.
MENU/R
Notes:
If you choose SNOOZE OFF, the alarm will ring for about 40 seconds at the
selected time. By pressing any key you can switch off the alarm at any time.
To deactivate the alarm, choose OFF in the ALARM menu, otherwise the alarm
will ring again the next day.
If you choose SNOOZE ON, the alarm will ring in regular intervals approx.
every 10 minutes till the batteries of the handset are empty. By pressing any
key (not the
key) you can switch off the alarm at any time, after 10
minutes the alarm will ring again. To switch off the alarm, press the
The alarm will ring again the next day. To deactivate the alarm, choose OFF in
the ALARM menu, as described above.
Factory default: OFF
22.2 Adjusting the volume (AUDIO SETUP)
You can adjust the volume of the handset or the speaker when using the
hands-free function as follows:
!
Press the
key.
MENU/R
!
Use
or
key to select HS SETTING.
!
Press the
key.
MENU/R
!
Use
or
key to select AUDIO SETUP.
!
Press the
key.
MENU/R
!
Use
or
key to select SPEAKTER VOL or EARPIECE V.
!
Press the
key. The LCD shows the current setting.
MENU/R
!
Use
or
key to select the volume level from VOLUME 1 to
VOLUME 5.
!
Press the
key
MENU/R
GB - 50
key.
MENU/R
key.
Factory default: VOLUME 3 for both
22.3 Ring tone (melody and volume) (RING SETUP)
You can choose the ring tone for incoming calls from the telephone network
(RING EXT) as well as the ring tone from the door unit or other handsets
registered at the same base (RING INT) and adjust its volume.
!
Press the
key.
MENU/R
!
Use
or
key to select HS SETTING.
!
Press the
key.
MENU/R
!
Use
or
key to select RING SETUP.
!
Press the
key.
MENU/R
!
Use
or
key to select RING INT or RING EXT.
!
Press the
key.
MENU/R
!
Use
or
key to select MELODY or VOLUME.
!
Use
or
key to select a ring tone from melody 1 to 10 or adjust
the volume from 1 to 5 or switch it off completely (VOLUME OFF). When
setting the ring tone or the volume, the telephone will sound the selected
melody or ring with the chosen volume.
!
Press the
key to confirm.
MENU/R
Factory default: MELODY 1 / VOLUME 3 for both.
22.4 Setting key tones (TONE SETUP)
Every time you press a key, your handset confirms it with a key tone. These
key tones can be disabled.
!
Press the
key.
MENU/R
!
Use
or
key to select HS SETTING.
!
Press the
key.
MENU/R
!
Use
or
key to select TONE SETUP.
!
Press the
key. The LCD shows "KEY TONE".
MENU/R
!
Press the
key again. The LCD shows the current setting.
MENU/R
!
Use
or
key to select ON or OFF, to enable or disable the
function.
!
Press the
key.
MENU/R
Notes:
!
For normal use, we recommend you leave the key tones enabled. This
makes the phone easier to use.
!
In certain conditions, a warning tone will sound when an incorrect key is
pressed. This warning tone cannot be disabled.
Factory default: ON
22.5
Selecting a language on the display
(LANGUAGE)
The handset supports several predefined languages: English, German,
French, Italian, Spanish, Dutch, Russian, Portuguese, Turkish, Polish,
Publicité
Chapitres
Table des Matières
