Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20.4
Deleting all entries from the phone book
(DELETE ALL)
!
Press the
key.
MENU/R
!
Use
and
key to select PHONE BOOK.
!
Press the
key. "ADD ENTRY" appears.
MENU/R
!
Use
and
key to select DELETE ALL.
!
Press the
key. The LCD shows "CONFIRM?".
MENU/R
!
Press the
key to confirm. The handset generates a confirmation
MENU/R
beep.
20.5 Phone book status (PB STATUS)
The PB status shows the number of phone book entries already stored.
!
Press the
key.
MENU/R
!
Use
and
key to select PHONE BOOK.
!
Press the
key. "ADD ENTRY" appears.
MENU/R
!
Use
and
key to select PB STATUS.
!
Press the
key. E.g. "11/50" is displayed, that means there are 11
MENU/R
out of 50 possible entries in the phone book.
21. Base settings (BS SETTING)
21.1 Deleting a handset from the base (TERMINATE
HS)
This function allows you to delete a handset registration from the base.
!
Press the
key.
MENU/R
!
Use
and
key to select BS SETTING.
!
Press the
key. "TERMINATE HS" appears.
MENU/R
!
Press the
key. The LCD shows "PIN?".
MENU/R
!
Enter the current PIN code (the default PIN code is "0000").
!
Press the
key.
MENU/R
!
Use
or
key to select a handset.
!
Press the
key to confirm.
MENU/R
nonexistent handset, a warning tone will be heard.
!
After a few seconds, the selected handset will not be registered any
more, and the LCD shows "NOT REGISTERED".
21.2 Dialling mode (DIAL MODE)
This setting is only necessary if required by your telephone system. See user
manual of the telephone system.
You can select to change the dialling mode by the following steps:
!
Press the
key.
MENU/R
!
Press
or
key to choose BS SETTING.
!
Press the
key.
MENU/R
!
Press
or
key to choose DIAL MODE, then press the
The LCD shows the actual setting.
If you select the current handset or a
MENU/R
!
Use
and
PULSE).
!
Press the
key.
MENU/R
Note:
If you are not sure which dialling mode to select, please contact your local
service provider.
Factory default: TONE
21.3 FLASH TIME
This setting is only necessary if required by your telephone system. See the
user manual of the telephone system.
You can change the Flash time with the following steps:
!
Press the
key.
MENU/R
!
Press
or
!
Press the
key.
MENU/R
!
Use
or
!
Press the
key. The LCD shows the current setting.
MENU/R
!
Use
or
!
Press the
key.
MENU/R
Factory default: SHORT
21.4 Modifying the PIN (MODIFY PIN)
This function allows you to change the PIN number of the currently active
base. The default PIN is 0000.
!
Press the
key.
MENU/R
!
Press
or
!
Press the
key.
MENU/R
!
Use
or
!
Press the
key. The LCD shows "PIN?".
MENU/R
!
Enter the current PIN.
!
Press the
key. The LCD shows "NEW PIN".
MENU/R
!
Enter a 4-digit new PIN.
!
Press the
key. You will be requested to confirm the PIN code.
MENU/R
!
Enter the new PIN again then press the
new PIN is activated.
Note:
It is important that you memorize your new PIN. If you loose your PIN, you
cannot make any modifications to the device which require a PIN.
21.5 Resetting the base (BS DEFAULT)
This function allows you to reset the base setting to the factory default.
!
Press the
key.
MENU/R
!
Press
or
key.
!
Press
or
key to select the desired dialling mode (TONE or
A confirm beep will be heard.
key to choose BS SETTING,
key to choose FLASH TIME.
key to select SHORT/LONG.
key to choose BS SETTING,
key to select MODIFY PIN 4.
key to confirm. Now your
MENU/R
key to choose BS SETTING, then press the
key to choose BS DEFAULT.
key.
MENU/R
GB - 49
Publicité
Chapitres
Table des Matières
