Gb - Cross Line Laser; Basic Safety Notes; Description - Meister MKL 100 Manuel D'utilisation

6566030-Kreuzlinie-man 20.03.14 13:25 Seite 38
These notes contain additional
information regarding the use of
the cross line laser.
5 – Basic safety notes
Observe and follow all warnings and
notes in these operating instructions
and on the device itself when using the
cross line laser.
CAUTION!
If operating or adjustment units
other than the ones described here or
other methods are used, this may
lead to dangerous laser effects.
Intended use
The cross line laser is a measuring tool
with an aluminium housing designed for
use in home improvement and
decorating. It can be used to arrange
objects, for example, pictures. Uses
other than those intended can lead to
damages to people or objects. This unit
is only designed for private household
use.
Meister Werkzeuge GmbH takes no
responsibility for damages caused by
incorrect use or by the manipulation of
the cross line laser.
Danger of injury
CAUTION! Looking directly
into the laser beam may lead
to injury in the event that the
eye does not react and close!
• Never point the cross line laser
directly at the eyes of people or
animals.
• Never look directly into the laser
38
beam.
• Ensure that the cross line laser is
stored out of the reach of children.
• Avoid using the cross line laser with
objects that may reflect the light, for
example, mirrors.
• Always switch the laser beam off
when you leave the cross line laser
unattended.
Pay attention to damages to the
cross line laser
CAUTION! Never open the cross
line laser!
• Never drop the cross line laser as this
may lead to faulty results.
6 – Description
Scope of delivery
• Cross line laser
• Tripod
• 2 batteries (AA), 1.5 V
• Operating Instructions
• Guarantee
How it works
This self levelling cross line laser is an
instrument with two laser beams
designed to draw horizontal and/or
vertical lines. This laser level adjusts
itself within a range of +/– 3° in just 8–
10 seconds or less. The base of the
level accommodates two quality spirit
levels. Once the unit has levelled itself,
the laser lines remain horizontal in line
with a rotation of 360º. The light and yet
stable tripod can be used to set the
laser line to the height you require.