Hilti HDM 330 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.4 Discarding initially dispensed mortar
WARNING
Risk of injury Chemicals hazard.
▶ Never point the dispenser toward yourself or other persons. Incorrect use can lead to injury.
WARNING
Risk of injury Chemicals hazard.
▶ Begin dispensing mortar only after the mixing nozzle has been screwed on. Incorrect use can lead
to injury.
Note
Discard the initially dispensed mortar every time the static mixer (mixing nozzle) is changed.
The initially dispensed mortar is not suitable for use.
1. Repeatedly pull the trigger to the grip until the foil pack opens and mortar is ejected from the mixing
nozzle.
2. Pull the trigger back to the grip for one stroke of the dispenser.
◁ 1 = 1 stroke (approx. 5 ml)
◁ 15 = 1 stroke (approx. 75 ml)
3. Press the release button after the specified number of strokes.
4. Discard the volume of mortar initially dispensed.
◁ The dispenser is now ready to dispense ready-to-use mortar.
4.5 Dispensing
5
CAUTION
Risk of injury Chemicals hazard.
▶ When preparing to change the mixing nozzle, make sure that the dispenser/foil pack is not under
pressure.
Note
Refer to the instructions for use of the foil pack / cartridge for further information about use of the mortar.
Fit a new mixing nozzle for each use. Failure to comply with this point will result in an inadequate
quantity of mortar being dispensed.
1. Repeatedly pull the trigger to the grip until the foil pack opens and mortar is ejected from the mixing
nozzle.
2. Press the release button after finishing dispensing or if the operation is interrupted.
3. Pressing the release button prevents further ejection or leakage of mortar.
4.6 Changing the foil pack
▶ Change the foil pack.
4.7 Removing the foil pack holder / cartridge from the tool
▶ Remove the foil pack holder / cartridge from the tool.
5 Care of the product
CAUTION
Risk of injury Chemicals hazard in the event of inadvertent dispensing.
▶ Before cleaning, remove the foil pack to prevent inadvertent dispensing.
▶ Keep the dispenser, especially its grip surfaces, clean and free from oil and grease.
4
English
Printed: 20.03.2017 | Doc-Nr: PUB / 5208055 / 000 / 03
4
6
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hdm 500

Table des Matières