General Information - Hilti AG 230-S Mode D'emploi

AG 230-S
diamond cutter
It is essential that the operating instructions are read
before the tool is operated for the first time.
Always keep these operating instructions together
with the tool.
Ensure that the operating instructions are with the tool
when it is given to other persons.
Operating controls and components
Spindle lockbutton
Side handle
Threaded bushing for side handle
Protective rib
On / off switch (dead-man type)
Kwik-Lock quick-release nut
Cutting disc / grinding disc
Clamping flange with O-ring
Contents

1. General information

2. Description
3. Tools and accessories
4. Technical data
5. Safety rules
6. Before use
1. General information
1.1 Indication of danger
-CAUTION-
This word is used to draw attention to a potentially dangerous situation which could
lead to minor personal injury or damage to the equipment or other property.
-NOTE-
This word is used to indicate instructions and other useful information.
1.2 Pictograms
Warning signs
General Warning:
warning electricity
Printed: 07.07.2013 | Doc-Nr: PUB / 5069436 / 000 / 00
Locating lug
Adjusting nut
Clamping lever
Spindle
Disc guard
Clamping nut
Pin wrench
Page Contents
13 7. Operation
14 8. Care and maintenance
14 9. Troubleshooting
15 10. Disposal
16 11. Manufacturer's warranty - tools 24
19 12. Declaration of conformity
Symbols
Warning: Read the
hot surface operating
instructions
before use.
Page
22
23
23
23
24
Return waste
material for
recycling
13