APLIC 302656 Mode D'emploi page 21

Insert a CR2032 1.5V battery into the battery compartment. Ensure
that the positive pole of the battery is pointing towards the battery
compartment cover. Then close the battery compartment.
Installing the bracket
Glue the wide foam plate on the inside of the curve to avoid any pos-
sible slippage. Place the bracket with the curve facing down in the
desired position on the handlebar of your bicycle. Take the supplied
rubber mounting ring and hook it into the bracket fixture provided for
this purpose, so that the bracket sits firmly on the handlebar.
Note: Alternatively, you can mount the bicycle computer on the centre
rod of your bicycle. To do this, you need to unscrew the curve of the
bracket and mount it with a 90 ° offset.
Crossbar
21
English