Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 3.02
HEADPHONE SAFETY
WARNING! To protect your hearing, follow these guidelines when you use headphones:
1.
Set the volume to the lowest setting before you begin listening.
2.
After you begin listening, adjust the volume to a comfortable level.
3.
Do not listen at extremely high volume levels. Extended high-volume listening can lead to
permanent hearing loss.
4.
Once you set the volume, do not increase it. Over time, your ears adapt to the volume,
(volume levels that are not uncomfortable, may still damage your hearing.)
PARTS IDENTIFICATION
WARNING! Do not operate the tool if any part is missing. Replace the missing part before
operating. Failure to do so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make sure that all items
in the parts list are included.
Contents:
•
Analog Meter
•
Arm Support
•
Waterproof Search Coil
•
Adjustable Stem
•
Headphone Jack
•
Search Coil Adjusting Knobs
•
Lock Nut
•
Control Housing
ASSEMBLY OF THE DETECTOR
1.
Turn the stem's lock nut clockwise until it has loosened.
2.
Adjust the stem. It should be level with and about 0.5 in. (1.3 to 5cm) above the ground with
your arm relaxed at your side when you stand upright.
3.
Turn the stem's lock nut counter-clockwise to lock it in place.
4
Metal Detector
For technical questions call: 1-800-665-8685
8476749
Fig.1
Publicité
Table des Matières
