Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 3.02
Metal
Detector
SPECIFICATIONS
Head Phone Jack
Batteries (2)
Audio Frequency
Detection Range
Frequency
INTRODUCTION
Used to detect metal substances, this tool is able to distinguish between ferrous (contains iron) and
non-ferrous metals. Audio signals and an analog meter ensure that you are aware of any results. This
model is able to detect metals on land and under water. It has a 4 mode automatic tuner and also
comes equipped with:
•
Adjustable Sensitivity
•
Ground Balancing Control
•
Adjustable Metal Shaft
•
Headphone Jack.
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and/or damage to the equipment.
If you are using headphones be aware that you may be less aware of your surroundings. Always check
local restrictions regarding headphone use before proceeding.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
2
14 in. (3.5mm)
(Head phone not included)
Current
Type
Voltage Range
400 Hz ± 60 Hz, 700 Hz ±105 Hz, 1,500 Hz ± 225 Hz
Depth: 55 in. (140 cm)
15 kHz ± 2 kHz
9V DC (not included)
Alkaline
6~11.5 V
For technical questions call: 1-800-665-8685
8476749
Publicité
Table des Matières
