Listening To Radio - Stihl ADVANCE ProCOM Instructions D'entretien

GB
NOTE:
• The battery performance may be reduced over time with
usage.
• Battery life may vary depending on conditions,
environmental factors, functions of the product in use, and
devices used with it.
5.5 Adjusting the Volume
You can easily adjust the volume by tapping the (+) Button
or the (-) Button. You will hear a beep when the volume
reaches the maximum or minimum level. The volume is set
and maintained independently at different levels for each
audio source even when you reboot the headset.
For listening to streaming audio contents from your
smartphone and for phone calls, adjust the volume on your
smartphone.
6. PAIRING THE HEADSET WITH BLUETOOTH
DEVICES
When using the headset with other Bluetooth devices for
the first time, they will need to be "paired." The pairing
operation is required only once for each Bluetooth device.
This enables them to recognise and communicate with
one another whenever they are within range. The headset
can pair with multiple Bluetooth devices, such as a mobile
phone or Digital mobile radio (DMR) device via Mobile
Phone Pairing and Second Mobile Phone Pairing.
6.1 Pairing with Mobile Phone
1. Press and hold the Multi-function Button for 7 seconds when
the headset is switched off. You will hear a voice notification,
"Phone pairing" and alternating blue and red flashing lights
will indicate that the device is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode,
select ADVANCE ProCOM in the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
6.2 Pairing with the Second Device
A second mobile phone or a DMR radio device can be
connected.
1. Press and hold the Multi-function Button for 12 seconds
when the headset is switched off. You will hear a voice
notification, "Second mobile phone pairing" and blinking
blue LED will indicate device is now discoverable.
2. With your mobile phone or your DMR radio device in
Bluetooth-pairing mode, select ADVANCE ProCOM in
the list of devices detected.
3. If your mobile phone asks for a PIN, enter 0000.
7. USING MOBILE PHONE FEATURES
7.1 Answering a Mobile Phone Call
When you have an incoming call, simply tap the S Button
to answer the call. The phone call is not delivered to Mesh
Intercom but you can still hear the Mesh Intercom users.
7.2 Ending a Mobile Phone Call
To end a call, tap the S Button, or wait for the called person
to end the call.
7.3 Activating the Voice Assistant of Your Mobile Device
like Google Assistant or Siri
Press and hold the S Button for 2 seconds in stand-by
mode. For this, the voice assistant function must be
available on the mobile phone. Refer to your mobile phone
manual for further instruction.
8. LISTENING TO MUSIC WITH BLUETOOTH
DEVICES
First, start a music streaming service on your Bluetooth
device.
8.1 Playing or Pausing Music
Tap the Multi-function Button.
8.2 Tracking Forward
Tap the Multi-function Button twice.

9. LISTENING TO RADIO

NOTE: You can set the stations through the ADVANCE
ProCOM App.
9.1 Turning On and Off the FM Radio
Press and hold the (+) Button for 2 seconds. You will hear
a voice notification, "FM on" or "FM off".
9.2 Seeking Stations Forward
Tap the Multi-function Button twice.
10. USING THE MESH INTERCOM
Mesh Intercom allows team members to connect and
communicate with nearby users without the need to pair
each headset together. The working distance between
each ADVANCE ProCOM in Mesh Intercom can be up to
600 m (0.37 miles). Within the same channel in Open Mesh
or the same private group in Group Mesh, it can connect
with up to 16 users and 6 users can talk at the same time
for comfortable conversation.
Each additional ADVANCE ProCOM extends the range of
Mesh Intercom as a repeater.
18