Harman BSS Soundweb London BLU-100 Guide D'installation page 14

Table des Matières

Publicité

8
WATCHDOG OUTPUT:
Opto Output current:
Withstanding voltage:
Series Impedance:
CONTROL NETWORK
Connectors:
Maximum cable length:
Maximum number of nodes:
BLU link AUDIO NETWORK
Connectors:
Maximum cable length:
Latency:
Pass Through Latency:
POWER AND DIMENSIONS
Mains Voltage:
Power Consumption:
BTU Rating:
Operating Temperature Range:
Dimensions (HxWxD):
Weight:
BSS Audio incorporates high quality mechanical fans in some products. All mechanical fans have a
limited life expectancy. We recommend annual inspection of fans for dust occlusion and excessive noise.
Fan assemblies should be replaced after six to ten years of use. Environmental factors such as elevated
temperature, dust, and smoke can adversely affect fan life. Systems exposed to these conditions should be
inspected more frequently. Fan replacement can be performed either at the factory or by an experienced
technician in the field. Please contact BSS Technical Support for more information on purchasing replacement
parts or product service.
BSS Audio has a policy of continued product improvement and accordingly reserves the right to change
features and specifications without prior notice.
Phoenix/Combicon connector for failsafe control
14mA maximum
80V maximum (Off)
220 Ohms (isolated)
RJ45 Ethernet connector
100m/300ft on Category 5 cable between device and
Ethernet switch
60
2 x RJ45 Ethernet connectors
100m/300ft on Category 5e cable between devices
11/Fs [0.23ms@48k]
4/Fs [0.08ms@48k]
100-240V AC, 50/60Hz
<55VA
<188 BTU/hr
0º to 45º C (32º to 113º F)
1.75" (45mm)(1U) x 19" (483mm) x 9.0" (229mm)
6.4 lbs / 2.9 kg

Publicité

Table des Matières
loading

Table des Matières