Technical Specifications - Harman BSS Soundweb London BLU-100 Guide D'installation

Table des Matières

Publicité

Technical specifications

FRONT PANEL LED INDICATORS:
Other:
ANALOGUE INPUTS:
Mic/Line Inputs:
Input impedance:
Maximum input level:
CMRR:
Equiv. Input Noise (EIN):
Phantom power:
A/D Latency:
ANALOGUE OUTPUTS:
Maximum Output Level:
Frequency Response:
THD:
Dynamic Range:
Output Impedance:
Crosstalk:
D/A Latency:
CONTROL PORTS:
Control Input Voltage:
Control Input Impedance:
Logic Output Voltage:
Logic Output Impedance:
Logic Output Current:
Signal Clip, Signal Present, 48V (input only)
Control link status and activity for Ethernet and RS-232
connections (COM); Device configuration status (STAT);
Error (ERR); Power/Locate (PWR)
12 electronically balanced on Phoenix/Combicon
removable screw connectors
Nominal gain 0dB, electronically switchable up to +48dB,
in +6dB steps
3.5kOhm
+20dBu with 0dB input gain, (+8dBu with 12dB gain)
>75dB at 1kHz
<-128dBu typ. with 150 Ohms source
48V nominal, selectable per input
37/Fs [0.77ms@48k]
8 electronically balanced on Phoenix/Combicon
removable screw connectors
+19dBu
20Hz to 20kHz (+0.5/-1dB)
<0.01% (20Hz to 20kHz, +10dBu output)
108dB typ. (22Hz to 22kHz unweighted)
40 Ohms balanced and 20 Ohms unbalanced
<-75dB
29/Fs [0.60ms@48k]
12 inputs and 6 outputs
0 to 4.5v
4.7kOhms to +5V (2-wire mode) >1MOhm (3-wire mode)
0 or +5V unloaded
440 Ohm
10mA source, 60mA sink
7

Publicité

Table des Matières
loading

Table des Matières