Using The Photo (Jpeg) List - Samsung HL-T5076S Guide De L'utilisateur

Using the Photo (JPEG) List

You can play back the JPEG files saved on a memory device in various ways.
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 65)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
➢
Pressing the button over a photo icon shows the currently selected photo in full
screen.
➢ Press the INFO button and select View to view a photo image at its original size.
➢ Pressing the button over a folder icon shows the JPEG files included in the folder.
➢ While a full screen is displayed, ◄ or ► button will let you see another photo image in
the same folder.
➢
Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢ Moving to a photo may take a few seconds because the file needs to be loaded.
At this point, the
➢
This menu shows only the files whose extension is jpeg (or jpg). Files with other
formats such as gif or tiff will not be displayed.
➢ Fifteen thumbnail photos are displayed per page.
➢ The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
➢ Folders are displayed first and they are followed by all JPEG files in the current folder.
The folders and JPEG files are sorted in alphabetical order.
➢
If the photo is displayed in full screen, you can zoom in and out or rotate the photo on
the screen. (Refer to pages 69~70)
➢ It takes a while to show JPEG files as thumbnail images.
➢ WISELINK for this product supports JPEG files up to 8K x 8K pixels. For progressive
JPEG files or files whose size exceeds 8MB, the photo will be displayed as a
thumbnail only. When trying to view a progressive JPEG file, the "Not supported
mode" message will appear. When trying to view a file exceeding 8MB, the "This file
is too large to decode" message will appear.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
icon will appear.
English - 66
Continued...