Initial Setup; Using The Tv Controller - Samsung 6 Serie Mode D'emploi

04 Initial Setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the
initial setup process. You can manually perform this process at a later time in the
Setup menu.
• If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-
top box automatically.
• If you do not want to select Set-top box, please select Aerial.

Using the TV Controller

Turn on the TV with the TV Controller button on the rear of the TV and then use the control menu. The Control menu
appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure
below.
English - 12
>
Control menu
: Home
: Settings
: Return
Control Stick
The Control Stick is located on the
lower left corner of the back of the TV.
• w/v: Changes the volume.
• </>: Changes the channel.
Settings > General > Start
: Source
: Power off