Rockford Fosgate RFX Serie Installation Et Fonctionnement page 25

S
YMPTOM
Error 2
(Magazine Eject
Error)
Error 3
(Loading Error)
Error 4
(Unloading Error)
Error 5
(Elevator Error)
Error 7
(Focus Error)
Error 9
(TOC Error)
NO CD
(No Disc Error)
NO CONN
(Communication
Error)
CD Changer does
not operate
Disc is jammed in
the CD Changer
D
IAGNOSIS
Can't eject magazine
Magazine emitting spring is
damaged
Magazine tray is jammed
Tray loading has not completed
after 5 seconds
Loading mechanism and motor
(or driving circuit) is defective
Tray unloading has not
completed after 5 seconds
Unloading mechanism and
motor (or driving circuit) is
defective
Magazine tray is jammed
The laser pick-up is defective
Disc is warped or damaged
Disc is warped or damaged
The laser pick-up is defective
Magazine is empty or not
installed in the unit
8-pin DIN cable is
disconnected from the CDX
mechanism or source unit
CDX cable is intermittent or
severely damaged
CDX cable is disconnected from
the Source Unit or CD Changer
Communication issue
Disc load/unload problem
T
ROUBLESHOOTING
Press the reset button
Have a service center inspect and repair as
necessary
Inspect and repair as necessary
Press Eject, pull out the magazine, and try
again. Press Reset
Repair mechanism and loading motor (or
driving circuit)
Press Eject, pullout the magazine, and try
again. Press Reset
Have a service center repair mechanism and
loading motor (or driving circuit)
Repair CD changer mechanism; then press
Reset
Repair the laser pick-up
Put in a new disc
Put in a new disc
Have a service center repair the laser pick-up
Check the magazine and insert discs
Check the connection of 8-pin DIN cable
between the CDX and unit
Check connections and repair or replace CDX
cable as necessary
Check connections at the Source unit and CD
Changer and repair wiring as necessary
Press Reset on CD Changer
Press Reset on CD Changer. If CD Changer still
does not operate, see your Local Authorized
Rockford Fosgate Dealer
– O CD C
PTIONAL
R
EMEDY
HANGER
25