Orbit B-hyve 57946 Manuel De L'utilisateur page 18

Programming the Timer–DATE/TIME
If you are connected to wifi, the time
and date will automatically be sent to the
sprinkler timer.
To set the date and time manually, turn the
dial until the selection box is on DATE/
TIME and press the dial.
Set the date by turning the dial until the
correct year, month and day are shown and
press the dial to confirm each selection.
When setting the time, press the dial when
the right time is set. Be careful to make
sure that the am/pm selection is correct.
18
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app.