Using The Program (Prog Abc) Button - Orbit B-hyve 57946 Manuel De L'utilisateur

Using the PROGRAM (PROG ABC) Button

The A, B, C and Smart programs provide
the flexibility to set up and run different
programs for plants with different watering
needs. For example: you could set your lawn
zones to run on program A, your flowerbeds
to run on program B and your garden to run
on program C. Or, you can set up your zones
to use smart watering and the timer will use
local weather and on-site information to
automatically set a watering schedule for you.
The PROG ABC button toggles between
programs when setting up or modifying start
times, run times, how long and budget.
14
Press PROG ABC to turn on or off
programs that have been set-up. A, B, C or
Smart will illuminate to show programs that
are active and will water.
Note: To water in smart mode only, the
Phone icon is the only program that should
be showing in the LCD.
Note: If you do not see the program letter
(A, B, C or the phone) in the LCD, that
program will not water. Press PROG ABC
until you see the program(s) that you wish
to water.