Orbit B-hyve 57946 Manuel De L'utilisateur page 17

Programming the Timer–AUTO and OFF
The timer should be in AUTO during the
irrigation season and OFF in the winter
months or the non-irrigation months.
Turn the dial to the AUTO position and
press the dial or just leave it there to keep
it in AUTO.
If the dial selection is left in any position
other than OFF, it will revert back to
AUTO after approximately 20 seconds.
To turn your timer OFF, turn the dial to
OFF and press the dial or just leave it in
the OFF position.
Note: Programming for each of the features covered
here can be accomplished at the timer or with the app.
17