Haier HEBF100 Serie Directives D'installation Et Guide De L'utilisateur page 12

3. Remove the bottom hinge and the two washers. Set the washers aside.
4. Using a 3 mm hex key remove the hinge pin from the bottom hinge, and then
reinstall the hinge pin in the hole next to the hole from which it was removed.
Replace the two washers.
5. Remove the screw from the bottom of the cabinet and move it to the matching
hole on the opposite side.
a
6. Using the three hex-head screws removed earlier, reinstall the bottom hinge on
the opposite side.
10
a
b
a
Hinge Pin
b
Washers
a
Screw
a
a
Screws
a