FITFIU FITNESS BESP-200 Manuel D'instructions page 39

STEP 4
1. Insert the handlebar post (6) into the front opening tube of the main frame (1) and secure it with the locking
knob (28) and the locking knob (45).
2. Secure the handlebar (7) to the handlebar post (6) with 4 sets of M8 screws (41). Then place the phone holder
(10) on the handlebar (7) and press it down.
STEP 5
1. Place the display (40) on the handlebar. Connect the monitor sensor cables to the main frame sensor cables
(1) and to the handlebar (7).
2. Slide the iPad holder (16) onto the handlebar (7), then secure it with the locking knob (45), 8mm washer (35)
and flat fixture (46).
NOTE: Connect the cables as shown in the picture.
41
7
6
1
45
46
16
39
10
28
45
35
BESP-200
40
32
7
EN