FITFIU FITNESS BESP-200 Manuel D'instructions page 38

STEP 2
1. Screw the right pedal "R" and the left pedal "L" (23/24) to the right and left crank respectively (21/22). Secure
them with the two lock nuts (47/48) and tighten them with a key.
NOTE: The right pedal should be screwed in clockwise and the left pedal counter-clockwise.
STEP 3
1. Remove the height adjustment knob (28) from the seat post (5) by unscrewing it.
2. Place the seat post (5) in the rear opening tube of the main frame (1) at the desired height and secure it by
screwing the height adjustment knob (28).
3. Place the seat slide (8) on the seat post (5), then secure it with the D10 washer (31) and the longitudinal
locking knob (27).
4. Place the seat (9) on the seat slide (8), secure the seat by tightening the seat lock nuts.
23
21
47
48
31
27
5
1
28
22
24
9
8
38