Removing The Grease Filters; Replacing The Carbon Filter - ETNA AO160WIT Mode D'emploi

MAINTENANCE
Grease filters
Carbon filter
EN 8
Clean the grease filters at least once a month. During cleaning, the
aluminium parts of the filters may become dull as a result of the
cleaning agents used, particularly when placed in the dishwasher. This
is normal and is not covered by the warranty.
Removing the grease filter
1. Switch off the cooker hood.
2. Release the grill and push it downward.
3. Push the wire brackets (B) aside.
4. Remove the grease filter from the grille.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
1. Switch off the cooker hood.
2. Release the grill and push it downward.
3. Attach the carbon filters to the motor.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.