Measuring Procedure - Exotek Instruments MC-160SA Mode D'emploi

Pinless Moisture Meters
Manual
Wood Group
200
300
400
500
600
700
800
900
1000
1100

MEASURING PROCEDURE

A er selec ng the appropriate material-group the unit must be hold up in the
air for automa c 0-correc on.
The unit is ready for measuring a er about 2 sec.
Hold the spring electrodes without excessive force and in a approx. 40
to the material. All of the 3 measuring springs must be in good contact with
the material to be measured.
Measurements may be taken in diff erent spots of the material, or the measur-
ing springs could be slided across the material.
BACKLIGHT
To increase ba ery life, the backlight dims down to OFF automa cally a er
about 5 seconds if no measuring value changes. Immediate reac va on of
backlight a er key-press or changing of measuring value.
ENG
MC-160SA
Density Range
200 – 300 kg/m³
300 – 400 kg/m³
400 – 500 kg/m³
500 – 600 kg/m³
600 – 700 kg/m³
700 – 800 kg/m³
800 – 900 kg/m³
900 – 1000 kg/m³
1000 – 1100 kg/m³
> 1100 kg/m³
- 6 -
o angel