Starting Up - Trotec BD10 Notice D'emploi

2. Starting up

Inserting/changing the battery
1) First remove the lid from
the battery compartment.
2) Insert the battery.
Make sure that the poles are correctly aligned.
3) Close the lid of the battery compartment..
The batteries have to be changed when the „
nuously in the display. Avoid corrosion by removing the batteries when
not used over longer periods.
Keypad
1) On/Measuring key
2) Area/Volume key
3) Key for indirect measurements
4) Key for individual/Continuous measuring
B - 3
5) Plus key ( + )
6) Minus key ( - )
7) Memory key
8) Reference key
9) Backlight/Units key
10) Delete/Off key
LCD Display
1) Laser active
" symbol blinks conti-
2) Reference value (at the front)
3) Reference value (at the back)
4) Variable measuring functions
Operating Manual – Laser Distance Meter BD 10
Area measurements
Volume measurements
Indirect measurements
18
EN