Blumfeldt 10028637 Mode D'emploi page 12

EN
12
OPERATION
• Attach this heater to a suitable ceiling. The appliance must hang at least
bPRYHUWKHRRUDQGPXVWKDYHDPLQLPXPGLVWDQFHRIPWRWKH
ceiling.
• Make sure that the hook is able to undertake a weight 3 or 4 times that of
the Patio Heater itself.
• These appliances must be supplied with proper voltage and frequency
(220-240 V ~ 50 Hz), and connected to an individual, properly grounded
branch circuit, protected by a circuit breaker which in accordance with
wiring rules. The power cord of this appliance must be fastened with the
FKDLQLQVWDOODWLRQFDQRQO\EHFDUULHGRXWE\TXDOLHGSHUVRQLQR
avoid a hazard.
• Power levels can be set by pulling on the power switch:
0 = off; level 1 = 750W; level 2 = 1500W
Metal chain
Housing
Heating element
behind metal grid
Pull switch