Disposal Of Waste - Videotec OUPT5CPU Manuel D'instructions

Remove the board.
Fig. 3
Replace the Pan & Tilt CPU board with the new one
present in the kit.
Fig. 4
Refit the board and cables in reverse order to that
shown in the figures.
Headquarters Italy Videotec S.p.A.
Via Friuli, 6 - I-36015 - Schio (VI) Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: info@videotec.com
Fix the top unit. For further information
refer to the relative chapter in the manual
of the product.
The MAC Address is contained on the label
that is on the CPU board.
Fig. 5
After having replaced the board, the
product must be configured once again via
browser. For further information refer to
the relative chapter in the manual of the
product.

7 Disposal of waste

materials
This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
the world.
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
www.videotec.com
MNVKOUPT5CPU_1339_EN