External Component Operations - JVC KS-FX270 Manuel D'instructions

EXTERNAL COMPONENT OPERATIONS

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
3
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See "Selecting the external component to use" on page 27.)
1
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected device and start playing the source.
3
26
Select the external component.
• If "LINE IN" does not appear on the display, see page 27
and select the external input ("EXT IN").
To turn up the
volume
Adjust the volume.
To turn down
the volume
1