Using The Setup Menu - Hitachi CP-X958W Manuel D'utilisation

Adjustments and functions (continued)
SET UP
Images and display positions can be adjusted from the SETUP menu.
RGB signal input
S E T U P
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
Adjustment item
(BRIGHTNESS)
SHARPNESS
(V. POSITION)
(H. POSITION)
COLOR BAL R
(COLOR BALANCE Red)
COLOR BAL B
(COLOR BALANCE Blue)

Using the SETUP Menu

Move the cursor to the item to be adjusted and move the MENU button of the projector or the DISK PAD
button of the remote control to change the length of the bar display.
• The menu cannot be displayed while the initial screen ("No input is detected." or "Sync is
Caution
out of range.") is being displayed.
• Tint cannot be adjusted with N-PAL, M-PAL, PAL or SECAM video signal input.
• Tint, color and sharpness cannot be adjusted with RGB signal input.
• V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with video signal input.
• FREEZE function will be cancelled after the operation "Menu".
• Displaying the menu cancels freeze operations.
18
I N P U T I M A G E O P T .
100
100
800
Volume decreases
VOLUME
BRIGHT
CONTRAST
COLOR
TINT
V. POSIT
H. POSIT
H. PHASE
H. SIZE
S E T U P
CONTRAST
SHARPNESS
COLOR BAL R
COLOR BAL B
Adjustment description
Darker
Lower contrast
Softer image
Less
Redder
Moves the image up and down.
Moves the image left and right.
Eliminates blanking.
Adjusts the horizontal size of the image.
Less red
Less blue
Video signal input
I N P U T I M A G E O P T .
VOLUME
BRIGHT
COLOR
TINT
Volume increases
Brighter
Stronger contrast
Sharper image
More
Greener
More red
More blue